Custom steel-framed kit homes delivered to the ACT and surrounds. Engineered for ACT building standards, designed for Canberra’s continental climate, and certified to meet energy performance requirements.
Our Shed Home Designs
All 7 models are available in Australian Capital Territory. Every kit is custom-engineered for your specific site – wind speed, soil conditions, bushfire rating, and energy performance are all calculated for your land.
The Noosa
3 Bed | 2.5 Bath | 198 sqm
Our most affordable shed home. Open-plan living, walk-in closet, wide front veranda.
From $82,900 base kit
The Tweed
3 Bed | 2 Bath | 280 sqm
Compact and considered. Two verandas, quality home on a smaller footprint.
From $94,900 base kit
The Tasman
4 Bed | 3.5 Bath | 292 sqm
Our most refined design. Clean lines, generous veranda, architect-feel layout.
From $112,900 base kit
The Bangaree
4 Bed | 2 Bath | 334 sqm
Longhouse-style with flexible rear section – stables, workshop, garage, or gym.
From $130,900 base kit
The Kyogle
4 Bed | 3 Bath | 237 sqm + 54 sqm garage
American Barn design. Distinctive roofline, integrated garage, two verandas.
From $129,900 base kit
The Kakadu
3 Bed | 2.5 Bath | 266 sqm
Engineered for efficient living. Two levels, full-width veranda, compact footprint.
From $130,900 base kit
The Freemantle
5+1 Bed | 3.5 Bath | 497 sqm
Our largest design. Dual living, office, built-in garage for boats and cars.
From $218,900 base kit
View All Designs | Try the Online Designer
Climate and Engineering for Australian Capital Territory
The ACT has a continental climate with cold winters and warm summers. Insulation is critical – Canberra regularly drops below zero in winter. Our shed homes are designed with high-performance insulation and meet 7-star NatHERS energy ratings for ACT conditions. Steel framing provides consistent thermal performance without the settling and shrinkage issues of timber.
We Deliver to These Australian Capital Territory Regions
Building Approvals in ACT
Approval Authority: ACT Planning and Land Authority (EPSDD)
The ACT requires Development Approval and a Building Approval from a licensed Building Certifier. Most residential builds in the ACT go through the merit track. Our kit includes full architectural drawings, engineered drawings, and NatHERS certification for your building certifier.
Bushfire Ratings (BAL)
The ACT has bushfire-prone areas, particularly in the urban-rural interface zones following the 2003 Canberra bushfires. BAL assessments are required in mapped areas. We design to BAL 12.5 through BAL 40, with BAL FZ available.
Owner-Builders in ACT
The ACT allows owner-builders with an Owner-Builder Licence from Access Canberra. You must complete an approved course and hold appropriate insurance. Our Base Kit and Kit Supply packages are suitable for ACT owner-builders on larger blocks.
For full details on approvals, timelines, and documentation, see our Building Approvals by State page.
What’s Included in Every Kit
- Structural steel framing
- Uni-Flush inline purlin system
- 0.47mm steel roof sheeting
- 0.47mm steel wall sheeting
- Standard single-glazed windows
- 8mm Reflex Foamcell base insulation
- Architectural and DA/BA drawings
- Engineered drawings and certification
- Engineered slab design
- 7-star NatHERS energy certification
Ready to Build in Australian Capital Territory?
Call us or send your details – we will get back to you within 24 hours with a personalised quote for your site.
Shed Homes delivers custom steel-framed kit homes to all states and territories across Australia.